Injection Molding Machines Shipping
Injection Molding Machine Transport Services
On This Page
Ship Your Injection Molding Machines
Get expert advice on the best shipping solution for your equipment.
Related Equipment
Overview
Injection molding machines require careful handling of precision tie bars, platens, and hydraulic/electric drive systems.
We transport machines from small-tonnage vertical molders to large horizontal machines exceeding 10,000 ton clamp force.
Robot integration, mold changes, and complete cell relocations coordinated as turnkey projects.
Typical Specifications
| Weight Range | 5 - 200+ metric tons |
| Clamp Force | 50 - 10,000+ tons |
| Types | Horizontal, vertical, multi-shot |
| Length | 5m - 25m+ |
Recommended Shipping Methods
Flat Rack Container
RecommendedFor medium machines.
Heavy Haul Trucking
RecommendedFor large horizontal machines.
Breakbulk
RecommendedFor oversized international moves.
Container (FCL)
For smaller machines.
Container, flat rack, RoRo or breakbulk?
We quote in this order because it is usually cheapest first. Most machines that look too big for a box fit once our crew takes off the bucket, boom, cab or wheels; larger ones are taken further apart across several containers, and pieces too big or heavy for a flat rack or roll trailer go breakbulk.
01Container
- Work needed
- We partially disassemble when needed (bucket, boom, cab, wheels), or take larger machines further apart across several high-cubes and open-tops, then crate, block and lash every part.
- Destinations
- Widest: almost every port worldwide, plus inland delivery by rail.
- Typical cost
- Usually the lowest, with no out-of-gauge surcharges.
- Protection
- Sealed steel box; loose parts and attachments travel locked inside.
- Best for
- Most machines: compact ones as they are, others after partial disassembly, and large ones split across several containers.
02Flat rack
- Work needed
- Ships assembled, blocked and lashed. Surcharges apply when wider than 2.4 m or taller than about 1.95 m.
- Destinations
- Most container ports, on the same vessels as containers.
- Typical cost
- Moderate; rises with every centimetre out of gauge.
- Protection
- Open to the weather; we protect cabs, electronics and hydraulics.
- Best for
- Excavators, dozers and loaders too wide for a container door.
03RoRo
- Work needed
- Drives on assembled; non-runners go on a roll trailer.
- Destinations
- Fewer destinations: regular lanes to Europe, West Africa, the Middle East, Oceania and parts of Latin America.
- Typical cost
- Often competitive for large self-propelled machines where a lane exists.
- Protection
- Below deck, but loose items and attachments cannot ride inside the cab.
- Best for
- Running machines going to a port with regular RoRo sailings.
04Breakbulk
- Work needed
- Lifted aboard piece by piece by ship’s or shore cranes, on its own skids or cradle, then stowed and lashed in the hold or on deck.
- Destinations
- Ports with breakbulk berths and heavy-lift cranes; sailings are booked voyage by voyage.
- Typical cost
- Usually the highest for a single small machine; often the only option for the largest pieces.
- Protection
- In the hold or lashed on deck; we crate, wrap and protect exposed parts.
- Best for
- Pieces too large or heavy for a flat rack or roll trailer: transformers, process modules, mining trucks, crane sections.
Handling & Preparation Requirements
- Tie bar protection
- Platen surface care
- Barrel and screw securing
- Hydraulic system preservation
- Robot arm securing
- Mold separate shipping
Common Models We Ship
Frequently Asked Questions
Can injection machines ship with molds?
Molds typically ship separately due to weight distribution. Small molds might remain installed.
What about two-platen machines?
Two-platen machines often have removable injection units for transport. We coordinate proper separation.
How are electric machines different?
Electric machines have sensitive servo drives. Climate protection and careful handling essential.
Plan your shipment
Import Duty & Tax Estimator
Estimate duty and VAT on the CIF value for 70+ destinations.
Dimensional Weight Calculator
Work out chargeable weight before you book.
Container Space Calculator
See how your cargo fits in 20ft, 40ft, and HC containers.
Route Finder
Load port, sailings, duty and rules for a machine and destination.
Ready to Ship Your Injection Molding Machines?
Get a customized quote for your equipment. Our experts handle injection molding machines shipments worldwide.